Replica Dellorto PHBG Black racing 21mm carburettor.
- Connection diameter of the manifold 24mm
- Connection diameter of the air filter 32mm
- Nozzles/jets suitable for this carburettor are Dellorto 5mm jets/nozzles
- Carburettors are delivered with a blanc nozzle/jet.
- Carburettors should always be cleaned before installation.
- Cable choke control.
- Insertion carburettor 24mm connection. Fast nozzle exchange by the drain bolt on the float chamber.
- Throttle drum cover is also screwable.
- Rubber for connection is availble at the section replacement parts.
caution!
the float bowl is fixed with 4 bolts, 3 long ones and 1 short one. Always make sure you replace the short bolt on the corner of the air set screw! If you screw a longer bolt in here, it will hit the air set screw and block it.
The jet that is
mounted in the carburettor / set is blank and different for each batch. (The
manufacturer does this because they cannot know on which engine / setup this
carburettor will be mounted). It is therefore
highly advisable to order a jet-set so that you can always achieve maximum
adjustment.
With a matching manifold applicable to various Puch models:
- Puch Maxi S / Maxi N / Maxi K / Maxi P / X20 / X30 / Korado / Manet and KTM hobby with E50 / Z50 / ZA50.
- Also on Puch MV / MS / VS / DS / VZ / MC / Monza / Jet / M50.
With a matching manifold also universally usable for:
- Kreidler Florett / RMC / RM / Zundapp / Yamaha DT / TY / Honda MT / MB / MBX / NSR / MTX / NS1 / Kawasaki AR / Suzuki TSX / TS / Tomos A3 / A35.