Exhaust Puch Maxi / E50 28mm Homoet Mustang black

Mustang exhaust by Homoet

• 28mm connection.
• Very fast and Quiet exhaust to be used with 50cc and 70cc cilinders.
• Black powdercoated 
• See Photo for the looks and little video for the sound

Dimensions:

• A: 250mm
• B: 680mm
• C: 25mm
• D: 28mm
• E: 6mm

Setup in the video:

• Airsal 50cc
• 15mm Bing original
• The Homoet exhausts are always very thick powdercoated, therefore it could be you need to grind some of the flange, especially with Airsal cilinders.

Tips:

• Use our long brass M6 nuts in combination with hardened studs (see related products). This so you can easily and fully tighten the exhaust flange. Brass is also softer than steel, so it will not seize.
• Always use a new exhaust gasket when fitting an exhaust

When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:

• At black outlets the paint can dissolve a little.
• Chrome and blanc exhaust manifolds may discolour

If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!