Exhaust Puch Maxi / E50 28mm Polini Sport raw

€ 289,90

Ex Tax: € 239,59

Directly available

Model: 952275

952275 952275 952275 Polini

https://www.puchshop.de/en-gb/exhaust-puch-maxi-e50-28mm-polini-raw.html 2025-05-22

Without shipping costs. VAT info.

Why Puchshop.de?

*Read the shipping page for more info.

Do you need some help or advice?

Check out our info center or contact us!

Description

Exhaust Puch Maxi / E50 28mm Polini Sport raw

New from Polini; the first ready-to-use Puch exhaust
Raw, untreated, no lacquer etc. simply oil in and go!
Best suited for standard and tuned 70cc cylinders but also very suitable for the 72cc!
Seperate exhaust flange that is attached to the cylinder so that the exhaust can easily be fixed with exhaust springs.
This Polini exhaust comes standard with a rubber for mounting on the exhaust support
Polini number: 200.0427

Tips:

Fit the exhaust flange to the cylinder with standard m6 nuts and washers so that the exhaust fits neatly over the flange.
Always use a new exhaust gasket when fitting an exhaust

When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:

At black outlets the paint can dissolve a little.
Chrome and blanc exhaust manifolds may discolour

If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!

Brand:	Polini
Model:	952275
MPN:	200.0427
Category:	Engine parts
Type product:	Exhaust
Type product:	Exhausts complete
Exhaust
Exhaust diameter:	28mm
Exhaust finishing:	Blank
Weight:	1800 gram

About Polini

Polini! Tuning your moped can be done in several ways. Tuning and modifying your moped lightly or heavily. With Polini for Puch, you always go one step further. Polini has been well-known in the moped and motorbike world for 80 years. Founded in Italy by Battista Polini in 1940, started with the idea that mopeds and motorbikes could be made better for racing than original. Engines and mopeds heavily tuned for racing with very high quality became a reality. Polini parts for Puch can be bought within each category. Polini makes cylinder sets for Puch, reedvalves, exhausts, ignitions, air filters for Puch, brake segments for Puch, carburetor, clutch for Puch, crankshaft, crankcases and gaskets. Unique parts like e.g. the Polini CP Carburettors, from 15mm clamp version to 21mm spigot can be bought at puchshop.de (Click here for our entire Polini range)