Exhaust Puch Maxi N / E50 28mm Akoa Hand-Made raw

Akoa Hand Made Blank with Kevlar silencer

• Raw, rough, no paint whatsoever, simply oil it and drive!
• Best suited for standard and tuned 65cc / 70cc cylinders but also very suitable for the 72cc / 74cc!
• With kevlar end silencer, the silencer is demountable
  
• Reinforced suspension bracket
• Only suitable for the Maxi N, suspension bracket is further back.
• Only suitable for cylinders with straight exhaust port!
  

Dimensions:

• A: 70mm
  
• B: 880mm
• C: 25mm
• D: 28mm
• E: 6.5mm

This Akoa exhaust features a slotted mounting lip, making it easier to attach!

Tips:

• Use our long brass M6 nuts in combination with hardened studs (see related products). This so you can easily and fully tighten the exhaust flange. Brass is also softer than steel, so it will not seize.
• Always use a new exhaust gasket when fitting an exhaust

When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:

• At black outlets the paint can dissolve a little.
• Chrome and blanc exhaust manifolds may discolour

If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!